About Bricks And Mortar Building

What you need to know about bricks and mortar building

Brick mortar is the substance that sticks bricks(murer kristiansand) between them. Repair with mortar for bricks varies depending on the application. The mortar for the brick terrace must be stronger than the mortar for the wall. Using the right mix, the bricks will last for years.

The mortar for the installation of bricks is a fantastic product. For all purposes, it’s just a glue, so you use it to stick two or more things together into one object. Maybe you cannot believe it, but in terms of brick mortar, science and technology are involved.

There are several types of mortar for brick, with different properties of the available strength. A standard mortar used with wall bricks is a mixture of cement, hydrated lime and a clean, washed sand form. Note that sand can have a significant impact on its power as well as on its final color. Not all types of sand look the same, because the small stone particles that form the sand have different colors.

Many old masonry buildings were made with a mortar that had abundant amounts of hydrated lime or just lime and sand. Typically, as there is more lime in the mortar, the mortar becomes weaker with respect to the soldering force. You might think you want a strong mortar, but the mortar lime offers the unique “self-healing” property. If small cracks develop in a mortar joint, the hydrated lime can form crystals that seal the cracks.

One of the most important steps is to fit the mortar with the application you want to deploy. Do not use the same mortar for brick walls as the one you use to seal mortar joints for the brick walls of the terrace. The mortar for the terrace must be much stronger than the wall, since the terrace is subject to a greater amount of wear, and if you encounter cold weather, mortar must be able to withstand countless freeze-thaw cycles.

To make a strong mortar for the brick(betong kristiansand) terrace, use pure cement, sand and water. The mixture must contain a very large amount of cement. You can try a combination of sandy two parts to one side of cement.

Make sure you remove all the mortar that moves out of the joints and you have cleaned it. Sprinkle the joints with a little water, so that they can be repaired and add the mortar. Make the mortar rise a little higher than the brick. Wait until mortar becomes a little stiffer and then remove excess mortar(piperehabilitering) with a trowel.

To repair the mortar from the brick walls, look closely at existing mortar joints. Pay attention to the small colored sand beads that are visible. When mortar is first installed and dried, its color will be a uniform gray. This is because all the sand is covered with a mortar-cement(murmester kristiansand) paste. But, over time, Mother Nature erodes the mortar-cement paste on the sand, exposing different pieces of stones forming the sand. You can see pieces of brown, red, gray, white and green sand!

The trick is to visit a sand pit and look at the different types of sand. Note that there may be a difference between sand particles in terms of size and color.

You will not need too many tools when working with the brick mortar. A trowel, and possibly a mortar bag, will allow you to carry out most of the repairs you need.

It is very important to ensure that the caramel joints are clean, free of dust and dampness before adding the new mortar. The water you sprayed on the old mortar helps the new mortar become stronger. Extreme water, dry brick and old mortar will suck out mortar water too quickly. If this happens, the new mortar will not be as strong as it could become.

Avoid rubbing the brick with mortar. If you make mistakes, try to remove excess mortar as much as possible on that day. Then wait for 30 days before cleaning the mortar paste on the brick. Use a solution of murine acid mixed with water, an acidic portion of ten parts of water. Moisten the brick, add water, then add the acid solution. Wear rubber gloves, goggles and old clothes. The acid is very toxic. Wait for ten minutes to take effect, then rub the area with a rough brush. Rinse with plenty of water. Repeat the process, if necessary, until all the mortar paste is removed from the brick. This is it!